Standard Supply and Accessories

  • 1. Proportional control bank with supplementary control for winch.

     

    2. Rotation by slewing ring and hydraulic motor reduction gears or by racks and pinion.

     

    standard_supply_2a

     

    standard_supply_2b

     

    3. Emergency stop button.

     

    4. Load moment limit device.

     

    5. Extension cylinders with sequence valves

     

    Microfissure Chrome Plating
    Through the electrolytic action, the cylinders stems are coated with several layers of chrome to obtain a thickness of 100 microns which guarantees resistance in saline fog up to 260 hours (in accordance with ASTM B537) and extreme surface hardness.

     

    6. Cylinder rods with marine double chromium plating and Nikrom

     

    Nickel+Chrome (Nikrom)
    For heavier applications, nickel and chrome are used for the surface treatment of the stems. Thanks to these elements the process guarantees at least 300 hours of resistance in saline fog (ASTM B537).

     

    7. Support plate for winch on 2nd boom

     

    8. Pins protected with Geomet plating.

     

    standard_supply_8

  •  

    9. Pipes and relevant fittings in stainless steel AISI 316L.

     

    10. High Ozone and weather resistance hoses.

     

    11. Hoses with galvanized fittings protected with heat shrunk shroud.

     

    standard_supply_11

     

    12. Other fittings galvanized and painted.

     

    13. Bolts and screws are either in stainless steel or protected with Geomet plating

     

    Geomet plating
    Many fixing components (screws and bolts) are protected from atmospheric agents and rust through a water-based liquid coating containing inorganic metals (zinc and aluminium), named Geomet. The process conforms to RoHS directive and guarantees resistance to oxidation in saline fog for over 500 hours. Thanks to this process, components are protected on all sides from corrosion and the presence of zinc and aluminium allows self regeneration of damaged areas at a microscopic level. All fixing components which must guarantee high mechanical resistance, are treated with Geomet 321, in that the absence of hydrogen avoids weakening, critical for applications in aggressive environments.

  • 14. Marine painting cycle with cataphoresis or zinc primer (RAL 1014)

     

    standard_supply_14

     

    Cataphoresis
    Cataphoresis is a surface treatment able to give crane steel components considerable corrosion resistance. It is an electrolytic process involving complete immersion of the piece: it allows uniform surface covering with the resin. All parts of the treated piece are covered, providing high protection against chemical agents and rust, reaching an oxidation resistance equivalent to 500 hours in saline fog. The process is completed with a coat of paint according to client’s needs.

     

    Coating treatment
    All parts of the crane are further protected from rust by a 3-layer coat (organic zinc primer, intermediate epoxypolyamidic, polyacrylic varnish) for a total thickness of 270 microns. The main result is a crane which is always protected by a colour which lasts.

     

    15. Hook.

     

    16. Fixing kit.

ACCESSORIES